Generalized degradation reliability model considering phase transition

doi:10.23919/JSEE.2022.000068

Journal of Systems Engineering and Electronics ›› 2022, Vol. 33 ›› Issue (3): 748-758.doi: 10.23919/JSEE.2022.000068

收稿日期:2020-12-30 出版日期:2022-06-18 发布日期:2022-06-24

Generalized degradation reliability model considering phase transition

ZHANG Ao¹(), Zhihua WANG¹(), Qiong WU^2,*(), Chengrui LIU³()

¹ School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
² Institute of Spacecraft System Engineering, China Academy of Space Technology, Beijing 100094, China
³ Beijing Institute of Control Engineering, Beijing 100094, China

Received:2020-12-30 Online:2022-06-18 Published:2022-06-24
Contact: Qiong WU E-mail:buaazhangao@hotmail.com;wangzhihua@buaa.edu.cn;wing21@126.com;liuchengrui_502@163.com
About author:|ZHANG Ao was born in 1994. He received his B.S. degree from the School of Aeronautic Science and Engineering, Beihang University, Beijing, China, in 2016, where he is currently working toward his Ph.D. degree. His research interests include prognostics and health management, degradation modeling, and reliability estimation. E-mail: buaazhangao@hotmail.com||WANG Zhihua was born in 1981. She received her B.S. degree in mechanical engineering from Dalian University of Technology, Dalian, China, and her Ph.D. degree in mechanical engineering from Beihang University, Beijing, China. She is currently an associate professor with the School of Aeronautics Sciences and Engineering, Beihang University. Her research interests include individual system online state intelligent monitoring, life test optimal design, and small sample reliability assessment via multi-source information fusion. E-mail: wangzhihua@buaa.edu.cn||WU Qiong was born in 1981. He received his B.S. degree in mechanical engineering from Northwestern Polytechnical University, Xi’an, China, and his Ph.D. degree in mechanical engineering from Beihang University, Beijing, China. He is currently a senior engineer with the Institute of Spacecraft System Engineering, China Academy of Space Technology. He focuses his study on spacecraft reliability. E-mail: wing21@126.com||LIU Chengrui was born in 1978. He received his B.S. and Ph.D. degrees in mechanical engineering from Beihang University, Beijing, China. He is currently a professor with the Research and Development Center, Beijing Institute of Control Engineering. His research interests include space craft reliability, fault diagnosis, and fault-tolerant control. E-mail: liuchengrui_502@163.com
Supported by:
This work was supported by the National Natural Science Foundation of China (11872085) and the National Key Research and Development Program of China (2018YFF0216004).

摘要/Abstract

Abstract:

Aiming to evaluate the reliability of phase-transition degrading systems, a generalized stochastic degradation model with phase transition is constructed, and the corresponding analytical reliability function is formulated under the concept of the first hitting time. The phase-varying stochastic property and the phase-varying nonlinearity are considered simultaneously in the proposed model. To capture the phase-varying stochastic property, a Wiener process is adopted to model the non-monotonous degradation phase, while a Gamma process is utilized to model the monotonous one. In addition, the phase-varying nonlinearity is captured by different transformed time scale functions. To facilitate the practical application of the proposed model, identification of phase model type and estimation of model parameters are discussed, and the initial guesses for parameters optimization are also given. Based on the constructed model, two simulation studies are carried out to verify the analytical reliability function and analyze the influence of model misspecification. Finally, a practical case study is conducted for illustration.

Key words: degradation, phase transition, reliability, stochastic process, nonlinearity

. [J]. Journal of Systems Engineering and Electronics, 2022, 33(3): 748-758.

ZHANG Ao, Zhihua WANG, Qiong WU, Chengrui LIU. Generalized degradation reliability model considering phase transition[J]. Journal of Systems Engineering and Electronics, 2022, 33(3): 748-758.

图/表 8

参考文献 38

1	YE Z S, WANG Y, TSUI K L, et al Degradation data analysis using Wiener processes with measurement errors. IEEE Trans. on Reliability, 2013, 62 (4): 772- 780. doi: 10.1109/TR.2013.2284733
2	WANG Z Z, CHEN Y X, CAI Z Y, et al Methods for predicting the remaining useful life of equipment in consideration of the random failure threshold. Journal of Systems Engineering and Electronics, 2020, 31 (2): 415- 431. doi: 10.23919/JSEE.2020.000018
3	NICOLAI R P, DEKKER R, VAN NOORTWIJK J M A comparison of models for measurable deterioration: an application to coatings on steel structures. Reliability Engineering and System Safety, 2007, 92 (12): 1635- 1650. doi: 10.1016/j.ress.2006.09.021
4	CHEN C, LU N Y, JIANG B, et al Condition-based maintenance optimization for continuously monitored degrading systems under imperfect maintenance actions. Journal of Systems Engineering and Electronics, 2020, 31 (4): 841- 851. doi: 10.23919/JSEE.2020.000057
5	WANG X, XU D H An inverse gaussian process model for degradation data. Technometrics, 2010, 52 (2): 188- 197. doi: 10.1198/TECH.2009.08197
6	CHEN X D, SUN X L, JI G X, et al Mis-specification analysis of inverse Gaussian degradation processes model. Systems Engineering and Electronics, 2019, 41 (3): 693- 700.
7	WHITMORE G A, SCHENKELBERG F Modelling accelerated degradation data using Wiener diffusion with a time scale transformation. Lifetime Data Analysis, 1997, 3 (1): 27- 45. doi: 10.1023/A:1009664101413
8	LI N P, LEI Y G, GUO L, et al Remaining useful life prediction based on a general expression of stochastic process models. IEEE Trans. on Industrial Electronics, 2017, 64 (7): 5709- 5718. doi: 10.1109/TIE.2017.2677334
9	ZHANG Y, LIAO H T Analysis of destructive degradation tests for a product with random degradation initiation time. IEEE Trans. on Reliability, 2015, 64 (1): 516- 527. doi: 10.1109/TR.2014.2336411
10	YE Z S, CHEN N The inverse Gaussian process as a degradation model. Technometrics, 2014, 56 (3): 302- 311. doi: 10.1080/00401706.2013.830074
11	YE Z S, CHEN L, TANG L C, et al Accelerated degradation test planning using the inverse Gaussian process. IEEE Trans. on Reliability, 2014, 63 (3): 750- 763. doi: 10.1109/TR.2014.2315773
12	KANG R, GONG W J, CHEN Y X Model-driven degradation modeling approaches: investigation and review. Chinese Journal of Aeronautics, 2020, 33 (4): 1137- 1153. doi: 10.1016/j.cja.2019.12.006
13	SI X S, WANG W, HU C H, et al Remaining useful life estimation−a review on the statistical data driven approaches. European Journal of Operational Research, 2011, 213 (1): 1- 14. doi: 10.1016/j.ejor.2010.11.018
14	YE Z S, XIE M Stochastic modelling and analysis of degradation for highly reliable products. Applied Stochastic Models in Business and Industry, 2015, 31 (1): 16- 32. doi: 10.1002/asmb.2063
15	ZHANG Z X, SI X S, HU C H, et al Degradation data analysis and remaining useful life estimation: a review on Wiener-process-based methods. European Journal of Operational Research, 2018, 271 (3): 775- 796. doi: 10.1016/j.ejor.2018.02.033
16	JARDINE A K S, LIN D, BANJEVIC D A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing, 2006, 20 (7): 1483- 1510. doi: 10.1016/j.ymssp.2005.09.012
17	TSUI K L, CHEN N, ZHOU Q, et al Prognostics and health management: a review on data driven approaches. Mathematical Problems in Engineering, 2015, 2015, 793161. doi: 10.1155/2015/793161
18	BAE S J, KIM S J, KIM M S, et al Degradation analysis of nano-contamination in plasma display panels. IEEE Trans. on Reliability, 2008, 57 (2): 222- 229. doi: 10.1109/TR.2008.917823
19	WANG X L, JIANG P, GUO B, et al Real-time reliability evaluation for an individual product based on change-point gamma and Wiener process. Quality and Reliability Engineering International, 2014, 30 (4): 513- 525. doi: 10.1002/qre.1504
20	WANG W B A model to predict the residual life of rolling element bearings given monitored condition information to date. IMA Journal of Management Mathematics, 2002, 13 (1): 3- 16. doi: 10.1093/imaman/13.1.3
21	WILSON E B, HILFERTY M M The distribution of chi-square. Proceedings of the National Academy of Sciences, 1931, 17 (12): 684- 688. doi: 10.1073/pnas.17.12.684
22	YAN W A, SONG B W, DUAN G L, et al Real-time reliability evaluation of two-phase Wiener degradation process. Communications in Statistics−Theory and Methods, 2017, 46 (1): 176- 188. doi: 10.1080/03610926.2014.988262
23	WANG P P, TANG Y C, JOO BAE S, et al Bayesian analysis of two-phase degradation data based on change-point Wiener process. Reliability Engineering & System Safety, 2018, 170, 244- 256. doi: 10.1016/j.ress.2017.09.027
24	WANG P, TANG Y, BAE S J, et al Bayesian approach for two-phase degradation data based on change-point Wiener process with measurement errors. IEEE Trans. on Reliability, 2018, 67 (2): 688- 700. doi: 10.1109/TR.2017.2785978
25	ZHANG J X, HU C H, HE X, et al A novel lifetime estimation method for two-phase degrading systems. IEEE Trans. on Reliability, 2019, 68 (2): 689- 709. doi: 10.1109/TR.2018.2829844
26	NG T S An application of the EM algorithm to degradation modeling. IEEE Trans. on Reliability, 2008, 57 (1): 2- 13. doi: 10.1109/TR.2008.916867
27	WANG H Y, MA X B, ZHAO Y A mixed-effects model of two-phase degradation process for reliability assessment and RUL prediction. Microelectronics Reliability, 2020, 107, 113622. doi: 10.1016/j.microrel.2020.113622
28	DONG Q L, CUI L R A study on stochastic degradation process models under different types of failure thresholds. Reliability Engineering & System Safety, 2019, 181, 202- 212.
29	YE Z S, CHEN N, SHEN Y A new class of Wiener process models for degradation analysis. Reliability Engineering & System Safety, 2015, 139, 58- 67. doi: 10.1016/j.ress.2015.02.005
30	ZHAO J Y, LIU F Reliability assessment of the metallized film capacitors from degradation data. Microelectronics Reliability, 2007, 47 (2/3): 434- 436.
31	SI X S, WANG W, HU C H, et al Remaining useful life estimation based on a nonlinear diffusion degradation process. IEEE Trans. on Reliability, 2012, 61 (1): 50- 67. doi: 10.1109/TR.2011.2182221
32	WANG X L, BALAKRISHNAN N, GUO B Residual life estimation based on a generalized Wiener degradation process. Reliability Engineering & System Safety, 2014, 124, 13- 23.
33	LI J X, WANG Z H, ZHANG Y B, et al Degradation data analysis based on a generalized Wiener process subject to measurement error. Mechanical Systems and Signal Processing, 2017, 94, 57- 72. doi: 10.1016/j.ymssp.2017.02.031
34	CHEN N, TSUI K L Condition monitoring and remaining useful life prediction using degradation signals: revisited. IIE Transactions, 2013, 45 (9): 939- 952.
35	HE W, WILLIARD N, OSTERMAN M, et al Prognostics of lithium-ion batteries based on Dempster-Shafer theory and the Bayesian Monte Carlo method. Journal of Power Sources, 2011, 196 (23): 10314- 10321. doi: 10.1016/j.jpowsour.2011.08.040
36	WANG X L, GUO B, CHENG Z J Real-time reliability evaluation of equipment based on separated-phase Wiener-Einstein process. Journal of Central South University (Science and Technology), 2012, 43 (2): 534- 540.
37	LAGARIAS J C, REEDS J A, WRIGHT M H, et al Convergence properties of the Nelder-Mead simplex method in low dimensions. SIAM Journal on Optimization, 1998, 9 (1): 112- 147. doi: 10.1137/S1052623496303470
38	VAN NOORTWIJK J M A survey of the application of gamma processes in maintenance. Reliability Engineering & System Safety, 2009, 94 (1): 2- 21.

m	True	$ {\mu }_{1}$	${\sigma }_{1}^{2} $	${\alpha }_{2}/{\beta }_{2} $	${\alpha }_{2}/{\beta }_{2}^{2} $	${b}_{2} $
m	True	1	1	2	1	1.5
5	Bias	?0.019 3	0.013 4	?0.014 7	0.068 8	?0.004 3
5	MSE	0.017 6	0.037 7	0.129 1	0.122 8	0.010 3
10	Bias	?0.010 5	0.009 3	?0.006 5	0.027 5	?0.004 5
10	MSE	0.009 1	0.018 2	0.061 4	0.060 3	0.005 2
15	Bias	?0.011 2	0.007 1	0.0001 4	0.023 9	?0.002 2
15	MSE	0.006 1	0.011 7	0.042 3	0.041 9	0.003 5
20	Bias	?0.006 1	0.007 3	?0.006 8	0.018 0	?0.001 4
20	MSE	0.005 1	0.009 5	0.032 7	0.032 7	0.002 5

m	Model	Log-LF	AIC	t_0.5	t_0.9
5	M₀	?118.3	246.6	1.520	0.623 0
	M₁	?130.3	268.6	4.477	2.114
	M₂	?130.6	269.2	3.961	1.998
	M₃	?153.4	312.8	14.45	11.60
10	M₀	?239.0	487.9	0.785 5	0.333 7
	M₁	?261.9	531.7	3.622	1.686
	M₂	?262.5	533.1	3.107	1.573
	M₃	?309.7	625.5	13.02	14.36
15	M₀	?359.1	728.1	0.525 4	0.212 2
	M₁	?393.1	794.1	3.331	1.544
	M₂	?394.0	796.1	2.818	1.432
	M₃	?465.2	936.4	12.42	15.02
20	M₀	?480.6	971.3	0.443 4	0.180 0
	M₁	?525.7	1 059	3.271	1.498
	M₂	?527.0	1 062	2.757	1.383
	M₃	?622.7	1 251	12.45	15.60

Model	${\alpha }_{1} \;\mathrm{o}\mathrm{r}\;{\mu }_{2} $	${\beta }_{1}\;\mathrm{o}\mathrm{r}\;{\mathrm{\sigma }}_{2}^{2} $	$ {b}_{1} $	$ {\mu }_{2} $	${\mathrm{\sigma }}_{2}^{2} $	$ {b}_{2} $	Log-LF	AIC	$ {t}_{0.5} $	${t}_{0.9} $
M₀	1.255 7	1.280 4	0.669 2	1.892 4e?5	7.364 2e?6	1.978 0	?31.420 9	74.841 8	859.5	761.8
M₁	0.144 9	0.654 4	?	9.865 6e?3	4.608 0e?3	?	?48.241 0	104.481 9	1 078.1	839.0
M₂	0.221 4	0.273 3	?	9.865 6e?3	4.608 0e?3	?	?48.012 0	104.024 1	1 074.6	835.6
M₃	6.083 4	8.518 7	0.221 3	?	?	?	?89.503 5	185.006 9	972.1	273.9

Generalized degradation reliability model considering phase transition

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 8

参考文献 38

相关文章 0

编辑推荐

Metrics

本文评价